Fuel Tank Installation Precautions

• Suggest the user to install the oil and water separator on the pipe of supply oil.
• In the tank connection, it is strictly forbidden to use ordinary raw materials to bring the seal to prevent the dissolution into the diesel engine, resulting in pipeline blockage.
• The tank should be installed position to avoid heat and vibration, as vibration causes the precipitate to appear and the heating causes a decrease in power.
• Consider firefighting requirements more than 1000L fuel tank recommended to be placed separately, isolated from diesel engine fire pump.
• Fuel temperature is an important factor in the good operation of diesel engines. Oil temperatures above 60*0 can cause volume expansion, significantly reducing the fuel unit volume Heat capacity so that the diesel engine output power is reduced, should avoid the external heat source on the oil temperature. • When the user installing, the tank should be installed the position the maximum suction head should not exceed 2 meters. The suction head of the output pump be calculated from the bottom of the tank.
• The tank should avoid exposure, the tank should be placed away from the fire scarce, near the tank are not allowed to smoke, not allowed to produce a spark or flame, volatile fuel can cause explosion Fried and the vicinity of the fuel tank should have the corresponding fire facilities (such as foam fire extinguishers, sand etc.) is strictly prohibited water as fire material, suggest more than 20CX)L of the tank placed Should be approved by the fire department.